- Range: 800 mm
- Modulated, infrared light
- Make or break switching function (switch selectable)
- LED-indication for target detected
- Multi supply voltage:
- 12 to 240 VDC and
- 24 to 240 VAC, 50/60 Hz
- 25 x 65 x 81 mm reinforced PC housing, IP 67
- Timer options (adjustable)
- NO and NC output
Ordering Key
Type Selection
| Housing W x H x D |
Ordering no. without timer |
Ordering no. with timer |
|---|---|---|
| 25 x 65 x 81 | ||
| PG 13.5 cable gland | PMD 8R G | PMD 8R GT |
| 1/2″ NPT cable gland | PMD 8R I | PMD 8R IT |
Specifications
| Rated operating distance (Sn) (0 to 5,000 lux) |
800 mm Reference target: Kodak test card R27, white, 90% reflectivity, 200 x 200 mm |
|---|---|
| Rated operational volt. (UB) AC: 45 to 65 Hz |
10.8 to 264 VDC 21.6 to 264 VAC |
| Rated operational power (relay ON) |
≤ 2 W (2.5 VA |
| Output Contact ratings (AgCdO) Resistive loads AC 1 DC 1 Small inductive loads AC 15 DC 13 Mechanical life (typical) Electrical life (typical) |
µ (micro gap) 3 A/250 VAC 3 A/30 VDC 2 A/250 VAC 3 A/30 VDC ≥ 40 x 106 operations ≥ 5 x 105 operations at 220 VAC – 3 A resistive load: 360 impulses/h |
| Dielectric voltage | 2000 VAC (rms) (cont./supply) |
| Sensing range (Sd) | 0.2 – 0.8 m |
| Light source | GaAlAs, LED, 880 nm |
| Light type | Infrared, modulated |
| Optical angle (200 x 200 mm test card) |
±12° |
| Operating frequency | 20 Hz |
| Response time OFF-ON (tON) ON-OFF (tOFF) |
≤ 20 ms ≤ 30 ms |
| Power ON delay (tv) | ≤ 300 ms |
| Output function | Switch selectable, make or break switching |
| Indication Target detected |
LED, yellow |
| Optional timer Delay on operate Delay on release One shot |
0.1 to 7 s ± 2 s 0.1 to 7 s ± 2 s 0.1 to 7 s ± 2 s |
| Environment Overvoltage category Pollution degree Degree of protection |
III (IEC 60664/60664A; 60947-1) 3 (IEC 60664/60664A; 60947-1) IP 67 (IEC 60529; 60947-1) |
| Temperature Operating Storage |
-25° to +55°C (-13° to +131°F) -30° to +80°C (-22° to +176°F) |
| Vibration | 10 to 150 Hz, 0.5 mm/7.5 g (IEC 60068-2-6) |
| Shock | 2 x 1 m & 100 x 0.5 m (IEC 60068-2-32) |
| Rated insulation voltage | 250 VAC (rms) |
| Housing material Body Front Cover Cable Gland Mounting Bracket |
PC, grey, reinforced PC, black PC, black PA, black, reinforced Steel, black |
| Connection Screw terminal Cable gland |
5 x 2 x 1 mm2 PG 13.5 or 1/2″ NPT for cable 6 to 10 mm |
| Weight | 110 g |
| Approvals | UL, CSA |
| CE-marking | Yes |
Selection of Function
Connection Diagram
Reduction Factors
Delivery Contents
- Photoelectric switch: PMD 8R
- Cable gland
- Installation instruction
- Mounting bracket
- Packaging: Corrugated cardboard (environmentally)
- friendly recycling material)
Truth Table
| – | Make switching | Break switching | ||
|---|---|---|---|---|
| Object present | No | Yes | No | Yes |
| LED | OFF | ON | OFF | ON |
| Load | Non-active | Active | Active | Non-active |
Operation Diagram
Dimensions
Accessories
- MB02 (longer mounting bracket), please refer to “Accessories”
