CD34 Capacitive Sensors
The CD34.. capacitive sensor are designed for detecting water based (conductive) liquids through
a non-metallic container wall and automatically adapt to various wall thickness of plastic or glass.
DPC01DM44 Voltage Monitoring Relays
DPC01DM44 relay is a multifunction threephase mains monitoring device. It can operate on both 3Ph and 3Ph+N mains detecting, besides the phase loss and the correct phase sequence, possible overvoltages and undervoltages or asymmetry and tolerance excess.
DPC02DM44 Frequency Monitoring Relay
DPC02DM44 relay is a multifunction threephase mains monitoring device. Power supply is provided by the monitored mains, is wide input range and switch mode. Consumption, dissipation and consequently heat
are very limited
DTA04 Motor thermistor relay
DTA04 is a motor thermistor monitoring relay. Through the motor internal PTC or PTCs the DTA detects when one or more motor windings are exceeding the maximum operating winding
temperature.
ET330 Energy Transducer
Three-phase energy transducer. Particularly indicated for active energy metering and for cost allocation (CT connection), with dual tariff management availability.It can measure imported
and exported energy or be programmed to consider only the imported one. Housing for DIN-rail mounting. The transducer is provided with RS485 Modbus port.
ICS08, ICB12, ICB18 & ICB30 sensor series with integrated IO-Link
Pleased to announce the launch of the first 4 families of inductive sensors with integrated IO-Link
communication. The ICS08, ICB12, ICB18 and ICB30 are now available. You can find the Launch Package in the new Reserved Area: http://172.16.0.161 Products – Product Launches – Sensors
DPB01CM44 – RMS 3-Phase voltage monitoring relay
xPB01CM44 relays are threephase mains monitoring devices. They can operate on both 3Ph and 3Ph+N mains detecting, besides the phase loss and the correct phase sequence, possible overvoltages and undervoltages.
Solid State Relays Accessories
In solid state relays there is accessories which are Cables, Thermal interface, Screw kits, DIN adaptors, Heatsinks , Protection covers, Fans, Terminal adaptors, Varistors, Temperature limit switches.
RG 1-phase solid state relays with integrated monitoring
The RG..M solid state relays incorporate monitoring functions for fast failure detection on top of the
switching capability in a slim 17.8 mm platform (up to 30 AAC). Timely detection for mains loss, load loss, SSR open and short circuit, SSR internal fault and supply out range are all possible with the RG..M series
LDPxPA2DU24 Loop Detector
LDP loop detector is well suited to be used in parking, drive through and car access control applications to control barriers, gates, bollards and car access equipment. Automatic frequency tuning
and easy sensitivity adjustment enable easy setup and installation. Automatic sensitivity boost ensures high bed vehicles are detected reliably.
