Marine Mini Conductivity Point Level Switch
Measuring Principle A Low alternating voltage is applied between the sense electrode and the probe ground. When the liquid reaches the point level , a conductive path is established between the two.
This is detected by MARINE’S Electronics and used to signal and alarm.
|Housing:||SS316||Ambient Temperature:||-20°C to 60°C|
|Probe length:||45mm||Output Type:||PNP Standard|
|Process Fitting:||1/2”, 3/4”, 1”BSP/NPT||Output:||Max 100mA, Short-circuit protected|
|Process Temperature:||Upto 80°C||Input Supply:||12…30VDC , (50mA max)|
|Sensitivity Range:||Upto 16 µSiemens|
Conductive liquids like: Water , fruit juice, chemicals etc.
Detection of Conductive Liquids in Pipelines
Overfill and Dry Run Protection.
Item Code: Marine