Features
- Either a normal Camera Link board or PoCL (Power over Camera Link) board can be connected.
- Since these products are equipped with a 5 Megapixel-2/3″ (FCM5MHPL) or a 3 Megapixel-1/1.8″ (FCM3MHPL) CMOS sensor, they are suitable for replacing existing 5 Megapixel or 2 Megapixel CCD cameras.
- The global shutter sensor provides the images without distortion even the shooting of fast-moving objects.
- The Full Configuration(with two Camera Link cables)for the high-speed operation, or the Base Configuration
(with single Camera Link cable) for the low-speed operation, can be selected depending on the application. - Achieves faster speed operation limiting the number of read-out lines.
Applications
- Image processing device for image inspection
- Inspection equipment for liquid crystal panel
- Input device of board inspection equipment for automatic chip mounter
- Image input device for ITS
- Other image processing applications requiring high speed and high resolution
Spectral sensitivity
Specifications
Model | FCM5MHPL | FCM3MHPL |
---|---|---|
Image sensor | Progressive scanning,Global shutter, Monochrome CMOS Unit cell size : 3.45μm(H)×3.45μm(V) |
|
2/3 inch size | 1/1.8 inch size | |
Number of pixels | 5.06 million pixels 2,464(H)×2,056(V) |
3.18 million pixels 2,064(H)×1,544(V) |
Readout modes | 32fps Horizontal scanning frequency fh=67.4kHz Vertical scanning frequency fv=32.2Hz Driving clock frequency fclk=84MHz Digital output Gradation 8bit/12bit (Base Config.) |
48fps Horizontal scanning frequency fh=76.6kHz Vertical scanning frequency fv=48.7Hz Driving clock frequency fclk=84MHz Digital output Gradation 8bit/12bit (Base Config.) |
150fps Horizontal scanning frequency fh=314.6kHz Vertical scanning frequency fv=150.2Hz Driving clock frequency fclk=80MHz Digital output Gradation 8bit (Deca Config.) |
210fps Horizontal scanning frequency fh=333.0kHz Vertical scanning frequency fv=210.5Hz Driving clock frequency fclk=80MHz Digital output Gradation 8bit (Deca Config.) |
|
Video output | 8bit Camera Link format compliant Deca (10TAP)/ Full /Medium/Base Configuration) | |
12bit Camera Link format compliant Medium/Base Configuration | ||
Electronic shutter | 1/59,000 sec. ~ | |
Asynchronous shutter | Pre-settable fixed exposure | |
Scanning mode | Full screen / Partial (Specified lines readout) / Binning | |
Lens mount | C mount (Fixed flange back) | |
Power supply | Camera connector(6Pin)/PoCL:DC12V±10% 250mA or less | |
Storage tempurature range | 0℃~40℃ (with no condensation) | |
External dimension | 48(W)×45(H)×37(D) (size except the salient) | |
Weight | 110g |
Note that specifications are subject to change without notice for improvement.